Sea Eagle Travel Canoe 16 Inflatable Canoe 3 Person Electric Pump Package - TC16K_EP3
The World's First Patented High Pressure All Drop Stitch Inflatable Travel Canoe has arrived!
Say goodbye to heavy, unstable, tippy, nearly impossible to store and transport canoes! The Sea Eagle Inflatable TC16 fits in a small car trunk or closet with plenty of room to spare and sets up in under 10 minutes!
The TC16 has accomplished feats well beyond reach of traditional canoes. It is a completely buoyant and unsinkable canoe, easy to upright and re-enter from the water, 33% lighter than comparable canoes, has incredible primary and secondary stability (stable to stand in), bow/stern molds that slice through the water, full length flat planing surface area for additional speed, designed to create lift and reduce drag, entire hull waterline length enabling paddling speeds up to 5 mph, full length double chine system and removable rear skeg to enhance tracking and increase stability, three separate air chambers for additional safety and is rated for up to Class IV whitewater.
U.S. Patent 9,452,809
Introducing the World's First and Only Patented All Drop Stitch Constructed Inflatable Portable Packable Canoe!
Fully inflated the Sea Eagle 16ft Travel Canoe is sixteen feet long, thirty-eight inches wide (at center), and twenty inches deep at the highest points with a max load capacity of 915 lbs! This incredible canoe packs down to a mere 40" x 24" x 16" rectangle, fits into its own bag and is 33% lighter than traditional hard shell canoes of the same class and category the TC16 still fits into the small trunk of a Mini Cooper!
With 3" thick rigid high pressure (10 psi) inflatable drop stitch gunwales (side rails) that stand 20" at the highest points and are set at a 15° angle with a 16' long x 25" wide x 3" thick rigid high pressure (10 psi) inflatable drop stitch floor you not only have incredible initial primary stability but you also have outstanding secondary stability. Far more stable than traditional rigid hull canoes!
U.S. Patent 9,452,809
Patented High Pressure (up to 10 psi) All Drop Stitch Construction
Patented Plastic Bow and Stern Molds that cut through the water increasing tracking
2 Movable and Adjustable Inflatable Drop Stitch Seats with backrests
Small Removable Rear Skeg for excellent tracking in shallow waters
Front & Rear Spray Skirts with Front and Rear Carry Handles
3 Independently Separate High Pressure Drop Stitch Chambers for added safety
4 Open and Close Floor Drains
12 D-Rings for securing seats at various locations
2 Conveniently located Diamond Patterned Non-Slip EVA Foam Deck Pads
2 Center Carry Handles
3 One-Way Air Valves
Fits in a bag
Rated for up to Class IV whitewater
Patented All Drop Stitch Contruction Creates The Shape Of Traditional Canoes
The flat three inch thick high pressure (up to 10 psi) side and floor chambers create a narrow, rigid and extremely spacious canoe. This construction system allows us to literally reinvent the traditional canoe in a unique inflatable form and provides previously impossible benefits. Greater safety, incredible stability and incomparable portability with no sacrifice to paddling performance. U.S. Patent 9,452,809
Safer Because Of Inherent Buoyancy
Unlike traditional rigid canoes, our Travel Canoe has added buoyancy from the inflatable air chambers of the floor and sides. This means while adhering to the Travel Canoes specifications it will not sink. In addition, because the air chambers have inherent buoyancy you can load this canoe with hundreds of pounds of supplies and still paddle and maneuver easily. Best of all this inherent buoyancy makes the Travel Canoe safer in whitewater rapids (up through class IV).
Double Chine System For Triple Stability And Improved Tracking
The Travel Canoe is more stable than many traditional canoes because of the Double Chines that run the entire length of the canoe. All canoes have some form of primary and secondary stability. The Travel Canoe actually has three forms of stability. The two distinct chines along with the flat bottom contribute to stability, speed and tracking of the Travel Canoe. The first chine is formed where the drop stitch inflatable floor meets the drop stitch inflatable side walls. The second chine comes from the angle of the drop stitch inflatable side walls. This results in primary stability from the flat bottom, secondary stability from the first chine and additional stability from the second chine.
Bow And Stern Molds Combined With Rear Removable Skeg For Speed And Tracking
The Travel Canoe features bow and stern molds that cut through the wind, water, waves and current while creating lift reducing drag and friction. The added feature of the large removable rear skeg further improves speed and tracking because the skeg reduces the natural yaw of a canoe and makes forward motion far more efficient. The skeg is designed for use on open water and windy conditions. It can be removed in seconds for use on whitewater or when using the J-stokes.
Diamond Deck Pads For More Secure Footing
To provide safe and secure footing when getting in and out of the Travel Canoe we have added a layer of diamond pattern anti-skid EVA foam decking. This not only makes this canoe safer to stand on (especially when fishing and casting) it adds an additional layer of protection to the floor. To secure the drop stitch inflatable seats while providing maximum adjustability (for one, two or three paddlers) additional d-rings have been added to hold a durable nylon strap that keeps the seat in place.
Packs Into A Bag And Fits Into A Small Car Trunk
Not only is the Travel Canoe 33% lighter than rigid canoes of the same class but it also deflates and packs down to a mere 1/4 of its inflated size. This means the Travel Canoe will fit easily into the smallest car trunks for both easy storage and transport, making it readily available for use at all times.
Person Capacity: 3
Hull Weight: 27 kg.
Length: 488 cm
Width: 97 cm
Interior: 462 cm x 64 cm
Load Capacity: 415 kg
Deflated: Approx. 101 cm x 61 cm x 40 cm
Chambers: 3: Port, Starboard, Floor
Inflation time: 7-9 Minutes
Material: 1100 Decitex Reinforced
Tube Dimensions: Gunwales 51 cm High at Bow & Stern, 38 cm High at Center. Gunwales & Floor: 8 cm Thick High Pressure Drop Stitch
Freight Shipments ship via Freight Curbside delivery. In other words, the shipping carrier will drop off your item on your property not inside your home. The shipping courier will call ahead of time and schedule a drop off date with you. In some cases, white glove delivery is available. Call Us for additional details.
I am completely satisfied with PrimeFair service. Not so much with the product itself though - but that has nothing to do with the seller, rather it’s a manufacturer decision to have cover without side piece. So, basically you are getting just one piece of cover that goes front-top-back only and doesn’t cover side of a cabinet.
Very happy with this heat pump! the 3 ton seems like it will work perfectly for our 1800 sq foot house in New Mexico at 6400ft. Our summer highs aren't usually over the mid 90's and winter lows rarely get below 20. Since it's almost summer, we haven't had the chance to really test out the heat other than to check that it works. When tested, the cooling portion works very well in the mid 80's in the afternoon to cool the house down to 72 quite easily, though we usually don't set it that cold. It did come with some minor shipping damage: a dent at the top edge maybe a foot wide and pushed in maybe four inches. We just bent it mostly back into shape and it appears to have had no effect on the internal mechanisms. It should save us a significant amount over our propane furnace and even be more efficient than the pellet stove at $7 per bag.